9 Decommissioning and disposal of the automatic machine
28
We reserve the right to make technical modifications
Rittal crimping machine R8-I
EN
9
Decommissioning and disposal of the automatic machine
9.1
Decommissioning the automatic machine
◼
Switch off the automatic machine.
◼
Disconnect the mains connector.
◼
Remove the compressed air hose from the compressed air source.
◼
Remove the compressed air hose from the maintenance unit.
◼
Open the front panel.
◼
Remove the wire end ferrule belt from the transport unit.
◼
Turn the wire end ferrule reel counter-clockwise until the wire end ferrule belt
has been removed completely from the machine.
◼
Remove the wire end ferrule reel.
◼
Empty the waste container and replace it in the automatic machine.
◼
Close the front panel.
◼
Pack the automatic machine in the original packaging.
The automatic machine is now prepared for transport and disposal, if necessary.
9.2
Disposing of the automatic machine
◼
Decommission the automatic machine as described in section 9.1 "Decommis-
sioning the automatic machine".
◼
Ensure that the automatic machine is disposed of in accordance with the national
and local regulations.
The disposal of the automatic machine as household refuse is not
permitted.
The automatic machine must be disposed of environmental-con-
form and correctly.
Note:
You can send the product to Rittal for disposal. Contact your re-
sponsible country representative.
