5 Configuring the automatic machine
Ritta l crimping machine R8-I
We reserve the right to make technical m odifications
11
EN
Fig. 3:
Installing connections
Legend
1
Adjusting screw
2
Manometer
3
Compressed air connection
4
Mains connection socket
◼
First connect the compressed air hose to the compressed air maintenance unit of
the automatic machine (fig. 3, item 3).
◼
Then connect the compressed air hose with the compressed air source.
◼
Check the manometer display (fig. 3, item 2).
The operating pressure must be between 5 and 5.5 bar.
◼
If necessary, adjust the operating pressure by pulling the adjusting screw up-
wards (fig. 3, item 1) and turning it carefully:
–
Turn clockwise to increase the pressure.
–
Turn counter-clockwise to decrease the pressure.
◼
Insert the mains cable in the mains connection socket (fig. 3, item 4) of the auto-
matic machine and connect it to the power supply.
5
Configuring the automatic machine
The automatic machine must be configured for the following situations:
–
When a different type of wire end ferrule should be processed
1
2
3
4
