2 General safety instructions
6
We reserve the right to make technical modifications
Rittal crimping machine R8-I
EN
2
General safety instructions
2.1
Intended use
The automatic machine is designed for insulation stripping and crimping of flexible
conductors in a single work step.
Only material described in section 2.2 may be processed with the automatic ma-
chine.
The process-secure machining can be guaranteed only for Rittal wire end ferrules;
the processing of products from other manufacturers can lead to machine malfunc-
tions and damage.
The automatic machine may be deployed only within the specified technical limits
(see sections 3.1 "Technical specifications" and 3.2 "Rating plate"). Changes and
conversions must not be made to the automatic machine. Warning signs must not
be removed.
The intended use also includes the observance of the complete documentation.
All other uses are deemed as improper. An improper use is one that is not known
to the manufacturer.
Secure operation is not ensured and the manufacturer’s liability is excluded for the
non-observance of these specifications.
2.2
Processable material and crimping form
Conductors
Flexible H05V-K and H07V-K PVC conductors with a cross-section of 0.5
–
2.5 mm².
Note:
The only wires that are considered processable are those that have
been approved by the manufacturer. For a complete list, please con-
tact your sales partner.
Wire end ferrules
Rittal wire end ferrules on a reel: www.rittal.com
Crimping form
Trapezoidal (standard)
2.3
Safety equipment
The automatic machine is equipped with the following safety equipment:
–
Safety switch inside on the front panel
–
3/2-way valve
–
Mains connector
This safety equipment must not be disabled. It must be checked annually by a ser-
vice technician.
The automatic machine must not be operated in the event of a malfunction.
