8 Troubleshooting
26
We reserve the right to make technical modifications
Rittal crimping machine R8-I
EN
8.3
Replacing the insulation stripping blade
Warning!
Risk of fatality due to electric shock!
Uninsulated parts can be touched when working inside the auto-
matic machine.
◼
Switch off the automatic machine.
◼
Remove the compressed air hose from the compressed air
source.
◼
Disconnect the mains connector.
◼
Open the front panel and place it down carefully.
Caution!
Risk of injury from sharp blades!
◼
Use tweezers to replace the blades.
◼
Dispose of the removed blades in a special container.
Note:
All fitted blades must be replaced for each cutter change.
Fig. 17:
Insulation stripping unit
◼
Remove both cams (fig. 17, item 1) (Allen key 2.5 mm).
◼
Loosen the fastening screws (fig. 17, item 2) (Allen key 2.0 mm) and remove the
cover.
◼
Replace all existing blades with new ones.
2
2
1
1
2
