Rion DA-21, Инструкция по эксплуатации

Страница: 61 / 172

49
Menu Operations and Setting Items
Sleep Sleep function setting
When the trigger signal type is set to “Time”, this setting controls the use
of sleep mode during recording.
OFF/ON
When sleep mode is ON, the unit goes into the power save state about 60
seconds after standby was activated by pressing the [REC] key. When
Mode is set to “Repeat”, the unit will enter the power save state also
between recording intervals.
In the power save state, the LCD screen is off.
About 90 seconds before recording start, the unit wakes up and goes into
standby until the actual start.
Pressing the LIGHT key in the power save state temporarily turns on
the LCD screen. If no further key is pressed, the unit will return to the
power save state.
Operation example for sleep mode
REC
Sleep
(low power
consumption)
60
sec.
60
sec.
90
sec.
90
sec.
10 min.
60
sec.
90
sec.
12:00 13:00 14:00 15:00
DA-21 settings
Mode:
Repeat
Start Time: 2014/01/15 12:00
Stop Time : 2014/01/15 15:00
Interval: 1h (1 hour)
Recording Time: 10m (10 minutes)
Recording start
1 hour 1 hour
Sleep
(low power
consumption)
Sleep
(low power
consumption)
Data
recording
10 min.
Data
recording
10 min.
Data
recording
After completion of recording,
the unit does not go into
the power save state.