Rion DA-21, Инструкция по эксплуатации

Страница: 52 / 172

40
Menu Operations and Setting Items
CCLD This setting is for microphones, accelerometers and other
sensors that require a sensor drive power supply. (See the
section starting on page 63.)
(CCLD: Constant Current Line Drive)
Note
If the unit is operated on battery power, take the
following points into account when setting the Inp
to CCLD.
When quitting the menu, if battery capacity is too
low for supporting CCLD operation, the unit will
switch itself off automatically.
In such a case, replace all batteries with fresh ones,
or connect an AC adapter or other external power
supply.
VP4x Select this setting when the accelerometer is connected to the
unit via the charge converter VP-40 etc. (see page 63).
Inp Tachometer signal, voice memo, marker setting (CH5)
This setting determines which signal type information is shown in the
CH5 area during recording.
OFF Select this setting if no signal assigned to CH5 is input.
Tacho Select this setting if a rotary pulse signal (tacho signal) is
supplied to the rotary pulse input connector.
Voice Memo
Select this setting if the optional voice memo microphone is
connected to the Voice Input connector and used for recording
voice memos.
Marker Select this setting if the switch of the connected voice memo
microphone is used for the marker function.
Voice memo recording is possible at the main screen, except when the
setting is “OFF”.