Rion DA-21, Инструкция по эксплуатации

Страница: 108 / 172

96
Recording
2. Input range setting / Calibration signal recording
Changing the input range setting
1. Press the [RANGE] key to cause the input range display section to
be shown in reverse (cursor active).
2. Use the [ ]/[ ] keys to move the cursor to the channel whose input
range setting you want to change.
3. Press the [ENT] key to allow changing the current input range setting.
4. Use the [ ]/[ ] keys to change the input range.
5. Press the [ENT] key.
6. If you want to change the input range for another channel, repeat
steps 2 to 5. Otherwise press the [RANGE] key to complete the range
setting procedure.
1 0 V
3 V
1 V
0 . 3 V
0 . 1 V
0 . 0 3 V
0 . 0 1 V
RANGE
RANGE
ENT
ENT
ENT
ENT
Select channel
(by moving cursor)
Change input range
(cursor for selected channel flashes)