60
Rinnai M
-
Series Condensing Boiler Combi Manual
Failure to properly commission the boiler as
described in this section
may result in
unreliable and unsafe burner operation and
reduced component life.
Boiler commissioning is a procedure used after
boiler installation to ensure the system and
boiler were installed correctly and ready for
operation.
THIS SECTION IS INTENDED
FOR THE INSTALLER
This boiler must be commissioned by a
licensed professional. Installer qualifications: A
trained and qualified professional must install
the appliance, inspect it, and leak test the
boiler before use. The warranty will be voided
due to any improper installation. The trained
and qualified professional should have skills
such as: Gas sizing; Connecting gas lines, water
lines, valves, and electricity; Knowledge of
applicable national, state, and local codes;
Installing venting through a wall or roof; and
training in installation of condensing boilers.
Training for Rinnai Condensing Boilers is
accessible online at
www.trainingevents.rinnai.us.
•
Work on the boiler must be carried out
by a licensed professional, using
correctly calibrated instruments with
current test certification. The
commissioning instructions are intended
for licensed professionals who
have the
necessary knowledge and are approved
for working on heating and gas systems.
•
The boiler and its individual shut off
valve must be disconnected from the gas
supply piping system during any
pressure testing of that system at test
pressures in excess of 1/2 PSI (3.5 kPa).
•
Before the boiler is fired for the first
time:
−
Ensure the boiler and system are
fully de
-
aerated
−
Purge the gas line between the gas
meter and boiler
−
Prime the pump (as described in this
section)
IMPORTANT
Topics in this section
•
Safety Precautions
•
Instructions
•
Air Purge Process
10
WARNING
1.
Remove the boiler front cover. See
section
“3.7
How to Remove the Front
Panel
”
for complete instructions.
2.
Locate the vent pump.
Step 1: Prime the Pump
You Will Need:
•
Philips head screwdriver
•
Flat head screwdriver
•
Combustion analyzer (calibrated)
Pump
Содержание M Series
