Rigol DS4000E Series Скачать руководство пользователя страница 190

Страница: 190 / 278

RIGOL

Chapter 2 Command System

2-178

DS4000E Programming Guide

:SAVE:WAVeform[:STARt]

Syntax

:SAVE:WAVeform[:STARt] {<file_spec>}

Description

Saves the waveform data to the external memory in "*.wfm" format.

Parameter

Name

Type

Range

Default

<file_spec>

ASCII String

<file_spec> includes the file storage location and

the filename with a suffix. Its length cannot

exceed 64 characters. If the USB storage device is

inserted into the USB HOST interface of the rear

panel, the storage location is E:\; if inserted into

the USB HOST interface of the front panel, the

storage location is D:\. For example, E:\123.wfm

Remarks

If the specified storage location already contains a file with the same filename, the original file will be

overwritten.

:SAVE:REFerence[:STARt]

Syntax

:SAVE:REFerence[:STARt] <file_spec>

Description

Saves the reference waveform currently stored in the oscilloscope to the external memory in "*.ref" format.

Parameter

Name

Type

Range

Default

<file_spec>

ASCII String

<file_spec> includes the file storage location and

the filename with a suffix. Its length cannot

exceed 64 characters. If the USB storage device is

inserted into the USB HOST interface of the rear

panel, the storage location is E:\; if inserted into

the USB HOST interface of the front panel, the

storage location is D:\. For example, E:\123.ref

Remarks



Before using this command to save the reference waveform file, send the :REFerence:SAVe command

to save the reference waveform of the current reference channel, and send the :REFerence:DISPlay

command to enable the REF function. otherwise, this command is invalid.



If the specified storage location already contains a file with the same filename, the original file will be

overwritten.



DS4000E does not support running a command to save the reference waveform file to the internal

memory for now. If required, save the file by performing the save operation on the front panel of the

oscilloscope.

Содержание DS4000E Series























































































































































































































































































Результаты поиска

Содержание DS4000E Series

Отзывы:

Бренды по названию

Популярные бренды

Rigol DS4000E Series, Руководство по программированию

Результаты поиска

Содержание DS4000E Series

Отзывы:

Бренды по названию

Популярные бренды