Rigol DS4000E Series Скачать руководство пользователя страница 183

Страница: 183 / 278

Chapter 2 Command System

RIGOL

DS4000E Programming Guide

2-171

:REFerence:DISPlay

Syntax

:REFerence:DISPlay <bool>

:REFerence:DISPlay?

Description

Turns on or off the REF function; or queries the on/off status of the REF function.

Parameter

Name

Type

Range

Default

<bool>

Bool

{{1|ON}|{0|OFF}}

0|OFF

Remarks

When the REF function is enabled or disabled, the display of the currently enabled reference waveform

channel(s) will be turned on or off (refer to the :REFerence<n>:ENABle command).

Return Format

The query returns 1 or 0.

:REFerence:RESet

Syntax

:REFerence:RESet

Description

After the save operation was executed, reset the vertical scale and vertical position of the current reference

waveform to that of the source channel settings in last save operation.

Remarks

You need to save the reference waveform (refer to the :REFerence:SAVe command) before using this

command.

:REFerence:SAVe

Syntax

:REFerence:SAVe

Description

Saves the waveform (screen region) of the specified source channel to the internal memory as the

reference waveform of the current reference waveform channel and displays it on the screen.

Remarks



This operation only saves the reference waveform in the volatile memory and the waveform will be

cleared at power-off.



You can set the color of the reference waveform (refer to the :REFerence:COLor command), adjust the

vertical scale (refer to the :REFerence:VSCale command) and vertical position (refer to

the :REFerence:VOFFset command) of the reference waveform.

Содержание DS4000E Series























































































































































































































































































Результаты поиска

Содержание DS4000E Series

Отзывы:

Бренды по названию

Популярные бренды

Rigol DS4000E Series, Руководство по программированию

Результаты поиска

Содержание DS4000E Series

Отзывы:

Бренды по названию

Популярные бренды