Ridder RB50EPLUS, Руководство по эксплуатации продукта

Страница: 15 / 36

Install the guiding profile (3) with guiding unit (2)
1.
-
Attach the mounting bracket (4) with bolts M8 (14) (2x or 3x) and self-locking nuts (15) to the
purlin (D). Refer to illustration 4.3.8
OR
- Attach the mounting bracket (4) with anchor bolts M8 (13) (2x or 3x) to the foundation (C).
Refer to illustration 4.3.9.
2. Attach the mounting bracket (4) with bolts M8 (14) (2x or 3x) and self-locking nuts (15) to the
purlin (A). Refer to illustration 4.3.10.
3. Fully tighten the 4 bolts M6 (11) and self-locking nuts (12) of the mounting brackets (4).
Refer to illustrations 4.3.8/4.3.9/4.3.10.
Make sure that the guiding unit (2) is put onto the guiding profile (3)
before installation. REFER TO ILLUSTRATION 4.3.2.
This prevents more subsequent work.
4.3.8 4.3.9
4.3.10
Ridder Drive Systems
T
+31 (0)341 416 854
F
+31 (0)341 416 611
I
www.ridder.com
15