Ridder RB50EPLUS, Руководство по эксплуатации продукта

Страница: 30 / 36

7.5 Erasing one end position
u
Description
1
Connect the tube motor to the adjusting switch.
2
Push the related Up-Down button and let the tube
motor turn to the end position that has to be erased.
3
Push and hold the programming button. Wait for a
minimum of 1 second and then go to step 4.
4
Push and hold the Down button also. Wait for a
minimum of 1 second and then go to step 5.
5
Hold the Down button and release the programming
button. Wait for a minimum of 1 second and then go to
step 6.
6
Push the programming button. The end position is
erased after the tube motor gives a “double click”.
Release the two buttons.
Click - Click
7
Obey the procedure in §7.4 to set the erased end position again!
Ridder Drive Systems
T
+31 (0)341 416 854
F
+31 (0)341 416 611
I
www.ridder.com
30