Ricoh TH-C1b, Руководство по обслуживанию

Страница: 318 / 433

10 February 2005 SERVICE PROGRAM MODE
5-115
Service
Tables
5.1.9 MEMORY ALL CLEAR (SP5-801)
Executing Memory All Clear resets all the settings stored in the NVRAM to their
default settings except the following:
SP8-381 to -387
SP8-391 and -411
SP8-491 to -493 and -496
SP8-581 to -584 and -586
Counter values
SP5-811 Machine serial number
SP5-907
Plug & play brand name and
production name setting
Normally, this SP mode should not be used. This procedure is necessary only after
replacing the NVRAM, or when the copier malfunctions because the NVRAM is
damaged.
Using an SD card
1. Upload the NVRAM data to an SD card ( 5.4.2 NVRAM Data Upload).
2. Print out all SMC data lists (SP5-990).
NOTE: Be sure to print out all the lists. If the NVRAM data upload is not
completed, it is necessary to manually change the SP mode settings.
3. Open SP5-801.
4. Press the number for the item that you want to initialize. The number you select
determines which application software is initialized. Touch 1, for example, if you
want to initialize all modules; or select the appropriate number from the table
below.
No. What It Initializes Comments
1 All Clear Initializes items 2 ~ 15 below.
2 Engine Clear Initializes all registration settings for the engine and
process settings.
3 SCS (System Control
Service) Initializes default system settings, CSS settings,
operation display coordinates, and ROM update
information.
4
IMH (Image Memory
handler) Memory Clear Initializes the registration setting for the image
memory handler. (Deletes all image files in the
HDD).
5 MCS (Memory Control
Service) Initializes the automatic delete time setting for
stored documents.
6 Copier Application Initializes all copier application settings.
7 Fax Application Initializes the fax reset time, job login ID, all TX/RX
settings, local storage file numbers, and off-hook
timer.
8 Printer Application Initializes the printer defaults, programs registered,
the printer SP bit switches, and the printer CSS
counter.
9 Scanner Application
Initializes the scanner defaults for the scanner and
all the scanner SP modes.