manualshive.com logo in svg

Ricoh PRO C9100, Руководство по эксплуатации, Страница: 71 / 236

Поделиться
Скачать
Ricoh PRO C9100 Скачать руководство пользователя страница 71

11.

Press [Yes].

12.

When erasing is completed, press [Exit], and then turn off the main power.

For details about turning off the main power, see "Turning On/Off the Power", Getting Started.

• If the main power switch is turned off before "Erase All Memory" is completed, overwriting will start

over when the main power switch is turned back on.

• If an error occurs before overwriting is completed, turn off the main power. Turn it on again, and

then repeat from Step 2.

Suspending Erase All Memory

To turn off the machine's power while Erase All Memory is enabled, suspend Erase All Memory in
advance. Erase All Memory will resume when you turn on the main power.

• If [Secure Erase] or [Format] has been selected, the process cannot be suspended.
• Erase All Memory cannot be canceled.

1.

Press [Suspend] while Erase All Memory is in progress.

2.

Press [Yes].

Erase All Memory is suspended.

3.

Turn off the main power.

For details about turning off the main power, see "Turning On/Off the Power", Getting Started.

Deleting Data on the Machine

69

Содержание PRO C9100













































































































































































































































Отзывы:

Нет отзывов