Ricoh PRO C9100, Руководство по эксплуатации, Страница: 61 / 236

1. Log in as the machine administrator from the control panel.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ Next] twice.
5. Press [Machine Data Encryption Settings].
6. Press [Back Up Encryption Key].
7. Specify how to back up the encryption key.
If you have selected [Save to SD Card], insert an SD card into the media slot on the side of the
control panel and press [OK]. When the machine's data encryption key is backed up, press [Exit].
For details about handling and inserting the SD card, see "Inserting/Removing a Memory Storage
Device", Getting Started.
If you have selected [Print on Paper], press the [Start] key and print out the machine's data
encryption key.
8. Press [Exit].
9. Log out.
Updating the Encryption Key
You can update the encryption key. Applying the new encryption key takes the same amount of time as
that for starting encryption. Updates are possible when the machine is working normally.
• The machine cannot be used while the encryption key is being updated.
• The encryption key is required for recovery if the machine malfunctions. Be sure to store the
encryption key safely for retrieving backup data.
• When the encryption key is updated, encryption is performed using the new key. After completing
the procedure on the machine's control panel, turn off the main power and restart the machine to
enable the new settings. Restarting can be slow when there is data to be carried over to the hard
disk.
Encrypting Data on the Machine
59