Ricoh PRO C9100, Руководство по эксплуатации

Страница: 182 / 236

• If the Windows firewall is activated, create a firewall rule in the Windows firewall's "Advanced
settings" to authorize ports 137 and 139.
• In the Properties window for "Network Connections", open TCP/IP properties. Then click detail
settings, WINS, and then check the "Enable NetBIOS over TCP/IP" box and set number 137 to
"Open".
W0406-107: Case 8
Kerberos authentication failed.
• Kerberos authentication settings are not correctly configured.
Make sure the realm name, KDC (Key Distribution Center) name, and corresponding domain name
are specified correctly.
• The KDC and machine timing do not match.
Authentication will fail if the difference between the KDC and machine timing is more than 5
minutes. Make sure the timing matches.
• Kerberos authentication will fail if the realm name is specified in lower-case letters. Make sure the
realm name is specified in upper-case letters.
• Kerberos authentication will fail if automatic retrieval for KDC fails.
Ask your service representative to make sure the KDC retrieval settings are set to "automatic
retrieval".
If automatic retrieval is not functioning properly, switch to manual retrieval.
W0409-000
Authentication timed out because the server did not respond.
• Check the network configuration, or settings on the authenticating server.
W0511-000 / W0517-000
The authentication server login name is the same as a user name already registered on the machine.
(Names are identified by the unique attribute specified in LDAP authentication settings.)
• Delete the old, duplicated name, or change the login name.
• If the authentication server has just been changed, delete the old name on the server.
W0606-004
Authentication failed because the user name contains words that cannot be used by general users.
• Do not use "other", "admin", "supervisor" or "HIDE*" in general user accounts.
W0607-001
An authentication error occurred because the Address Book is being used at another location.
• Wait a few minutes, and then try again.
7. Troubleshooting
180