20 June 2005
SERVICE PROGRAM MODE TABLES
5-75
Service
Tables
Sheet Through Magnification
[–50.0 ~ +50.0 /
0.0
/ 0.1%/step]
6017*
Adjusts the magnification in the sub-scan direction for ADF mode.
Use the
key to toggle b and - before entering the value
Staple Position Adjustment
[–3.5~+3.5 /
0.0
/ 0.5 mm step]
6105*
Adjusts the staple position in the main scan direction when using the two-tray
finisher.
Press
to toggle
±
. A larger value shifts the staple toward the edge of the paper.
Punch Hole Adjustment
6113*
Adjusts the punch hole position.
SP6113 1: 2-hole punches for Japan, North America, Europe, and 4-hole punches
for Northern Europe.
SP6113 2: 3-hole punches for North America, and 4-hole punches for Europe.
Press
to toggle
±
. A larger value shifts the holes toward the edge of the paper.
6113 1* 2-Holes
[–7~+7 /
0
/ 0.5 mm steps]
6113 2* 3-Holes
[–7~+7 /
0
/ 0.5 mm steps]
Fold Position Adjustment
6902*
Allows fine adjustment of the fold position on paper when the Booklet Finisher is
connected and used.
6902 1* A3/DLT
[-30~+30 /
0
/ 0.5 mm]
6902 2* B4
[-20~+20 /
0
/ 0.5 mm]
6902 3* A4/LT
[-15~+15 /
0
/ 0.5 mm]
Содержание A-C4
Страница 1: ...Model A C4 Machine Code B195 B198 B264 B265 SERVICE MANUAL 20 June 2005 Subject to change...
Страница 112: ...LEFT COVER 20 June 2005 3 8 3 8 LEFT COVER 1 Left upper cover A x4 2 Controller cover B x2 B195R955 WMF A B...
Страница 194: ...PRINTED CIRCUIT BOARDS 20 June 2005 3 90 3 19 5 PSU 1 Left cover 3 8 2 PSU A x4 x all B195R824 WMF A...