Ricoh 9100DN - Aficio SP B/W Laser Printer, Руководство пользователя программного обеспечения

Страница: 221 / 344

Parameter Value configured
Up to four WEP keys can be registered. Specify
the number to be registered with "val".
When a WEP is specified by key, the WEP spec-
ified by key phrase is overwritten.
To use this function, set the same key number and
WEP key for all ports that transmit data to each
other. Put "0x" on the front of WEP key.
You can omit the numbers with "val". The key
number is set to 1 when making these omissions.
The default is blank.
keyphrase "phrase" val {1|2|3|4} You can specify the WEP key when entering in
ASCII.
With a 64-bit WEP, you can use 10 digit hex-
adecimals. With a 128-bit WEP, you can use 26
digit hexadecimals.
Up to four WEP keys can be registered. Specify
the number to be registered with "val".
When a WEP is specified by key phrase, the
WEP specified by key is overwritten.
To use this function, set the same key number and
WEP key for all ports that transmit data to each
other.
You can omit the numbers with "val". The key
number is set to 1 when making these omissions.
encval {1|2|3|4} You can specify which of the four WEP keys is
used for packet encoding. "1" is set if a number
is not specified.
wepauth [open|shared] You can set an authorization mode when using
WEP. The specified value and authorized mode
are as follows:
open: open system authorized (default)
shared: shared key authorized rate
rate [auto|11m|5.5m|2m|1m] You can set the IEEE 802.11b transmitting
speed.
Remote Maintenance by telnet
219
5