北京锐志天宏科技股份有限公司
Beijing RichAuto S&T Co., Ltd.
Forging ahead, create future together!
30
workpiece surface. This parameter can only take effect when user uses auto tool setting
function. Invalid when manual set workpiece origin (press XY
→0, ZC→0
)
Manual Move: After tool setting finished, the pickup height of Z axis, system default is
40.000 mm
6) Motion Axis Set
Motor Dir: Modify the direction of motor rotation.
Axis Disable: If the user's machine is a two-axis machine, the Z-axis can be forbidden
here, then the screen will no longer display the Z-axis, and all Z-axis related parameters
will no longer be meaningful.
Neg Spd Limit: Set the maximum speed in the negative direction of the machine tool,
which limits all moving speed.
Pos Spd Limit: Set the maximum forward speed of the machine tool, which limits all
moving speed
Circle Limit :
①
Circle Limit (Maximum Processing Speed with Arc Instruction in Processing Program).
②
Circle Diameter (diameter limited when arc instructions are available in the processing
program)
7) Accel Setting
S Accl:
①
Linear(Linear acceleration mode);
②
Curve(Curve acceleration mode).
Linear: System default: linear acceleration is 800 mm/s
2 .
Crv Accl: Curve acceleration is 1000mm/s
2
, the proposed curve acceleration is 1-1.5
times of the linear acceleration value.
Accl Jerk:
It refers to growth rate of acceleration, that is acceleration‟s incensement per
unit time, which can alleviate the adverse effects caused by sudden acceleration and
deceleration of machine tools .
Skip S pd: Start speed of motion axis from stationary state. Not starting from 0, but
starting directly from a certain speed, so it can shorten the overall processing time, but this
speed shouldn‟t be too high. Too high, it will cause the motor losing steps, jitter and even
whistle; Set too small, it will reduce the operating speed of the entire graph.
8) I/O Port Setting
