北京锐志天宏科技股份有限公司
Beijing RichAuto S&T Co., Ltd.
Forging ahead, create future together!
27
1) Pulse Equiv
Linear axis:
The number of pulses required to send from the system when machine
moves every 1mm. Unit: pulse / mm;
Rotating axis:
The number of pulses required to send from the system when machine
rotate every 1 degree. Unit: pulse / degree.
Calculation method please refer to PS1.1.2
Setting mode:
Enter “
Pulse Equiv
”, cursor is in the X axis pulse equivalent position,
press“
” to move cursor as required, press“
”then ,input a new value, and
press“
”to save. To modify X, Y and Z axis value one by one in the same way,
press“
”then save all changes and return to the "
Pulse Equiv
" menu.
2) Table size
RichAuto-F135
system makes the table size as the soft limit values, in order to prevent
machine over travel. Machine size must be less than or equal to the actual size of
machine table.
Setting: Enter “Table Size, press“
” to move cursor as required, press “
”,
and inp
ut the new value, press“
” to save the changes, To modify X, Y and Z axis
value one by one in the same way. Press“
” Save all changes and go back to the
"Table size" menu
3) Home Setup
Home Speed: The movement speed of each axis when go mechanical origin (ZERO), the
system default X, Y axis home speed: 3000 mm/minute, Z axis home speed: 1800
