北京锐志天宏科技股份有限公司
Beijing RichAuto S&T Co., Ltd.
Forging ahead, create future together!
20
1) Work Setup:
WorkSpd: Processing program executes interpolation speed of instruction which
includes G01, G02 and G03, system default is 3000 mm/minute.
FastSpd: Processing program execute movement speed of G00 instruction, system
defaults is 3000 mm/min.
SpdScale: Actual processing speed=Work Speed*Auto Scale. System defaults the auto
scale doesn‟t affect the fast speed.
CycleCnt: System default is 1; user can modify it by themselves.
CyclItvl: The repeat processing interval of the same work file, the system defaults 0.
2) Safe Height:
SafeHgt: X,Y,Z axis lifting height during processing. System default Z axis is 40.000mm.
If other axis(X, Y) no need safe height, set 0.
3) Fall Down Scale:
FallType:
①
Z only (It works when only the Z axis moves alone);
②
Z move (It works as long as Z axis moves);
③
Speed unlimited (It does not take effect when the tool is falling down).
FallHght: System default is 5.000mm. Fall down scale takes effect when the Z spindle
falls to the fall height.
FallSpd: The maximum speed of Z axis when falling down, Unit: mm/min
FallLmt:
①
All: Limits work as long as Z axis fall down during the machining process.
②
First: Only the first tool is limited during the machining process.
4) Final Action:
Stop position of axis: when the processing is finished. Including: back to work origin,
back HOME , back position, none move, pick up Z axis, back to Z origin.
Set a special stop position: Press“
”move cursor to where user wants to
modify, p
ress“
” and input new coordinate values one by one, then press
