Rheavendors Group barista XX, Руководство по установке и обслуживанию

Страница: 15 / 49

pump motor
level probe
three-way valve
outlet
water outlet
boiler temperature probe
05.32.
air break
clicson
heat exchanger
temperature probe
05.33.
volumetric counter
espresso interno
by
B
A
A
A
05.27.
mixer motor
05.19.
grinder motor
05.21.
coffee brewer motor
A
MAN1920124 rel. 01 dated 23.09.2011 page no. 15 of 48 pages
espresso
to extract the slide including the fundamental components of the
vending machine, just remove the three screws A and separate the
two electric connectors B after having removed the coffee unit (see
13.05.) and the connectors of the temperature probes (see
05.38.a. and c.); now, you can extract the slide from the machine
cabinet;
after having extracted the slide of hydraulic components from the
cabinet, some “internal” parts can be easily inspected and
accessed; e.g. if the machine is disassembled this way, you can
easily set up the right phase of the coffee unit, which shall be
exactly in the position of the picture during the brewing phase;
the central articulation of the connecting rod shall be “moved
backwards” by some degrees compared to the ideal line joining the
axis of rotation of the unit and the upper end of the connecting
rod;
to achieve this result:
- loosen the socket head screw A;
- adjust the switch position by rotating the support as well as by
anticipating or postponing the cam trip on the switch lever;
- screw the socket head screw again;
05.22. coffee unit
presence switch
coffee unit rotation switch
coffee unit rotation
switch regulation