Rheavendors Group barista XX, Руководство по установке и обслуживанию

Страница: 18 / 49

presentazione
by
18
19
20
23
24
26
15
16
17
25
MAN1920124 rel. 01 dated 23.09.2011 page no. 18 of 48 pages
to power off the machine when the door is open;
attention
some parts remain anyway network-connected
act extremely carefully
use the service key to supply the vending machine if it is necessary
to activate the machine when the door is open; the service key is
in a support on the left wall inside the vending machine;
the button giving access to the programming mode of the machine
is arranged inside the door at the bottom of the cover (PROG);
the connection for insertion of the flash key is made available on
the cover, on the right side;
it contains coffee beans, it is protected by a cover; an orange
closing baffle enables the operator to lift it on safe conditions;
the grinder grinds the coffee beans in the hopper to pour them into
the coffee unit underneath; the grinding degree can be adjusted by
means of the index inside the semicircular sector;
after having received and compressed the ground dose, the coffee
unit will brew it with the water coming from the pump; the used
dose is conveyed to the grounds container (see 05.23.); it is
fastened by means of a lever;
the coffee brewer motor will rotate some parts of the coffee brewer
to compress ground coffee for brewing; rotation is controlled by a
switch driven by a cam that will inform the CPU on the position of
the brewer;
a switch makes sure that the coffee unit is properly installed to
prevent it from dispensing espresso in case of shortage;
it collects over sixty ground doses in E machines after having used
them in the coffee brewer; a software option (see 09.01.n.) will
show a warning message as soon as the tray is full;
instant product canisters dispense their content in the underlying
mixing bowls; an internal worm screw driven by the product motor
will push the instant product to the product slide; they can be
equipped with a wheel and a stirrer for constant dispensing; the
outlet, the dimension of which can be either standard or smaller,
has got a closing baffle;
the coffee bean canister (hopper) has a closing blade for insertion
before lifting it and a metal tongue that enables the machine to
dispense espresso drinks after having inserted it into its seat (see
05.35);
to protect the products, canisters are closed by a cover; the
versions not connected with the water mains are complete with a
water tank in the place of a product canister and it can be filled
through a cover hatch of the vending machine (see 05.29.);
they are intended to rotate the worm screws inside instant product
canisters to pour the product quantity necessary for selection in the
mixing bowls;
the mixing bowls of the mixers will accommodate the instant
products you have poured to mix them with water; the fan of mixer
motors will act at the bottom and the drink outflow to the
dispenser occurs by means of a silicone tube; mixing bowls and
outlet tubes can be washed with lukewarm running water;
05.15. door switch
05.16. internal button
(PROG)
05.17. flash key
connection
05.18. coffee beans
canister
05.19. grinder
05.20. coffee brewer
05.21. coffee brewer
motor
05.22. coffee unit
presence switch
05.23. grounds
container
05.24. product canisters
05.25. product motors
05.26. mixing bowls