![Rheavendors Group barista XX Скачать руководство пользователя страница 17](http://html1.mh-extra.com/html/rheavendors-group/barista-xx/barista-xx_installation-and-maintenance-manual_1451222017.webp)
05
02
04
03
08
06
07
09
presentazione
by
11
12
10
13
14
MAN1920124 rel. 01 dated 23.09.2011
page no. 17 of 48 pages
the Rhea
Barista
vending machine is a machine explicitly designed
for being easily used by all users since no specific competence is
required in preparing drinks;
the function consists in dispensing drinks by mixing food products
and water at a proper temperature; the correct operation of the
vending machine occurs in closed rooms in normal environmental
conditions and at a room temperature between 5
°
and 35
°
C, the
relative humidity below 80%;
use only specific ingredients for vending machines;
dispense by briefly pressing a key of the selection keyboard
(see 05.02.); make sure that the cup has been properly positioned
at the dispensing station, if necessary by using the flap support for
caps (see 03.08.);
after having closed the door, press the buttons to dispense; keys
will assume various functions in the programming mode (see 09.)
and enable the user to modify the machine parameters; keys are
numbered progressively from the left: 1, 2, …;
the front cover side just above the selection pushbutton panel
accommodates the pocket where to insert the stripe specifying the
names of the selections you can obtain;
the display messages inform users and operators about the
operation state of the vending machine;
the front panel of the door is lighted by a neon tube arranged in a
door compartment; the panel is orange in the espresso machine
and light blue in the instant machine;
a light indicator is blinking (colours as above) during the dispensing
cycle of drinks;
the Barista vending machine has got a fixed drink dispenser on the
cup support surface;
the door is closed by means of a lock; the key is mapped and
numbered for identification;
it collects all residual drops from the dispenser and, if necessary,
the waste water in excess from the boiler; it is slided at the bottom
of the machine case, in the front, and it is composed by a covering
drawer and a grilled cover that can be washed by running water;
an electric contact is intended to control the filling level (see 10.01.
and 13.01.); the floater is raised if the content is in excess;
a three-terminal socket is arranged at the back of the case for the
connection of the mains cable;
to power on and off the machine;
installed on the mains power supply (see 03.11.);
from where to let the silicone tube from the boiler come out for
emptying, in I machines;
the water inlet solenoid valve on R machines only has got an anti-
flood safety device intended to stop the water inlet in case of
failures; to its electrical pins can be connected in parallel an any
submersible pump (see 03.03.);
05.01. general
information
05.02. selection
keyboard
05.03. selection label
05.04. display
05.05. door lighting
05.06. light indicator
05.07. dispenser
05.08. door lock
05.09. drip tray
05.10. electric
connection
05.11. power on switch
05.12. fuses
05.13. water drain plug
05.14. water inlet
solenoid valve
Содержание barista XX
Страница 49: ......