Rheavendors Group barista XX, Руководство по установке и обслуживанию

Страница: 29 / 49

to determine the pump power on time and the water quantity it will
deliver; you can carry out a “time test” on the set-point; (see
13.19.);
water will be dispensed in the mixing bowls at the expiry of the
delay time you have programmed;
only for instant selections, the water flow in mixing bowls can be
regulated between low, medium, high by pressing keys “4” and “5”
(see 13.16.);
the rotation time of the mixer fan can be changed by pressing keys
“4” and “5”; if time is equal to zero, the mixer will not rotate; you
can carry out a “time test” on the set-point; (see 13.19.);
if the rotation time is other than zero, the mixer fan will be rotated
at the expiry of this delay time;
the mixer rotation speed can be regulated between “0” maximum
and “5” minimum by pressing keys “4” and “5” (see 13.17.);
to establish the water quantity of the second milk dispensing cycle;
to determine the water quantity delay of the second milk
dispensing cycle;
to establish the mixer rotation time of the second milk dispensing
cycle;
if other than zero, the mixer power on will be delayed by the time
you have set up;
to determine mixer rotation speed of the second milk dispensing
cycle;
to repeat the selection by N times automatically and produce drinks
of remarkable volume (jug);
press “4” and “5” to choose the drink name to display during the
dispensing cycle; options are listed here below:
- “standard”, the display will show “drink N under preparation”;
- “list of names” of drinks made available in the machine memory;
the display will show “ drink name under preparation”;
- “custom”: the display will show the user’s customised names; it
is necessary to create a configuration file with RheAction
(see 05.40.) and load it on the machine by means of a flash key
see 09.06.);
press key “2” to display:
use keys “4” and “5” to increase or decrease the boiler water
temperature;
use keys “4” and “5” to change the heat exchanger temperature;
LM dispensing
LM dispensing
LM dispensing
LM dispensing
LM dispensing
09.01.e. temperature
for the I versions
for the E versions
programmazione
by
heat exchanger NN
TEMPERATURE
MAN1920124 rel. 01 dated 23.09.2011 page no. 29 of 48 pages
0= inhib. 0.0
WATER N time
WATER N 0.0
start delay
medium
water flow : N
0= inhib. 0.0
MIXER N
MIXER N 0.0
start delay
00
MIXER speed N
0= inhib. 0.0
WATER LM time
0= inhib. 0.0
delay water LM
0= inhib. 0.0
MIXER LM
MIXER LM 0.0
start delay
00
MIXER LM speed
0=no n:00
JUG
------- n:00
selection name N
boiler NN
TEMPERATURE