Cleaning and service
26
Fig. 11:
• Tilt the blender backwards and support it on its back feet.
• Then clean the size reduction chamber and the flap.
Pos : 7. 5 / 00005 Übersc hrift en/1. 1 Ü berschrif ten/ 1. 1 Ü bers chrift en BDA/ 11 H eraus nehmen der Zer kl einerungs-Pl att en @ 2\mod_1262948122804_9. doc @ 18432 @ 2
6.1 Taking out the Size Reduction Plates
Pos : 7. 6 / 00010 Bedienungsanlei tungen/ 00140 Kapi tels ammlung Paddl e Blender/ 0004 PB R einig ung/ 0405 PB M odul Platt en ent nehmen @ 2\ mod_1262958799616_9. doc @ 18460 @
Fig. 12: Removing the Size Reduction Plates
• Check if the waste collecting receptacle was taken out.
• Tilt the blender backwards.
•
Hold the upper and lower ends of the plate with both hands and then turn it
towards the wall of the size reduction chamber.
• Then take the plate off the fulcrum pin.
• To reinsert it, simply hold the knife at the fulcrum pin and press it in until it
engages audibly (“click”).
Pos : 7. 7 / 00005 Übersc hrift en/1. 1 Ü berschrif ten/ 1. 1 Ü bers chrift en BDA/ 11 Schmi erung der Dr ehac hsen @ 2\ mod_1262960520152_9.doc @ 18467 @ 2
6.2 Lubricating the Fulcrum Pins
Pos : 7. 8 / 00010 Bedienungsanlei tungen/ 00140 Kapi tels ammlung Paddl e Blender/ 0004 PB R einig ung/ 0402 PB M odul Sc hmier ung Vaseli ne Öl @ 2\ mod_1262960693251_9.doc @ 18474 @
1
2
3
3
