Operating the machine
22
Fig. 9: Closing the Flap
• Press the handle downward to close the door.
The size reduction process starts automatically.
CAUTION
The device must be switched off and disconnected from the power grid before
anyone reaches into the device for cleaning or maintenance purposes.
NOTE
It is recommendable to use tear-resistant Retsch sample bags as far as possible.
Do not use any frozen samples or samples containing bones. The bags can be
damaged by shells.
Pos : 6. 19 /00005 Ü berschrif ten/ 1. 1 Ü bersc hrift en/ 1. 1 Übersc hrift en BD A/ 11 Zer kl einerung @ 2 \ mod_1263290014496_9. doc @ 18542 @ 2
5.7 Size Reduction
Pos : 6. 20 /00010 Bedi enungsanleit ung en/00140 Kapit elsamml ung Paddle Bl ender/0003 PB Kapit el Bedienung/ 0308 PB M odul Z er klei ner ung @ 2\ mod_1263290086522_9.doc @ 18549 @ 343
The messages shown in the display depend on the selected mode of operation.
5.7.1
Timer Operation
The 1
st
line shows the time that has elapsed (in sec.), the programmed time and
the selected speed.
In the 2
nd
line a bar display provides information on the progress of the run.
28/ 60s NORMAL
ooooooooo
This screen appears at the end of the size reduction process.
60/ 60s NORMAL
FINISHED
Whenever the door is opened, the main screen appears.
60s NORMAL
READY
5.7.1.1
Continuous Operation
The 1
st
line shows the elapsed time and the selected motor speed.
In the 2nd line a movable cursor indicates the fault-free operation of the device.
The elapsed time is indicated in seconds (0 - 99999 sec.).
