Operating the machine
20
Connect the smasher to the power grid and press the ON/OFF switch to turn on
the device.
The following initialisation sequence is shown in the display:
The message is displayed for 3 sec.
NOTE
The following are the factory settings for the device:
- Run duration 60 sec.
-
Motor speed “normal”
- Menu language English
It is recommendable to conduct the following
functional test
first:
• Lift the handle to open the door.
The size reduction chamber must be empty.
• Close the door again so that the size reduction can begin.
If you have maintained the factory settings, the device runs through a size
reduction process lasting 60 sec.
Pos : 6. 13 /00005 Ü berschrif ten/ 1. 1 Ü bersc hrift en/ 1. 1 Übersc hrift en BD A/ 11 Sprac he des Menüs aus wählen @ 2\ mod_1262858032822_9. doc @ 18297 @ 2
5.5 Selecting the Language for the Menu
Pos : 6. 14 /00010 Bedi enungsanleit ung en/00140 Kapit elsamml ung Paddle Bl ender/0003 PB Kapit el Bedienung/ 0302 PB M odul Spr ac he des M enüs @ 2\ mod_1262858135023_9. doc @ 18304 @
Select the menu language by pressing the
▼
and
▲
keys for 5 sec
as you are
switching on the device
. Use the
▼
key to scroll to the next screen:
Press the
◄ and ►
keys to scroll through the list of the available menu
languages.
Press the
▼
key to confirm the selected menu language.
Pos : 6. 15 /00005 Ü berschrif ten/ 1. 1 Ü bersc hrift en/ 1. 1 Übersc hrift en BD A/ 11 Ei ns etz en der Probe @ 2\ mod_1262858832798_9. doc @ 18318 @ 2
5.6 Inserting the sample
Pos : 6. 16 /00004 Warnhinweis e/G ener al VOR SICHT Gefahr von Pers onenschäden Gefährliche St off e @ 1\ mod_1236238456269_9.doc @ 7634 @
CAUTION
Danger of personal injury
Dangerous nature of the sample
–
Depending on the dangerous nature of your sample, take the
necessary measures to rule out any danger to persons.
•
Observe the safety guidelines and datasheets of your
sample material.
LANGUAGE
FRENCH
60s NORMAL
READY
AES Laboratoire
SMASHER 2.00A
