Transport, scope of delivery, installation
12
NOTICE
Installation of the machine
–
It must be possible to disconnet the machine from the mains at any time.
•
Install the machine such that the connection for the mains cable is
easily accessible.
Pos : 4. 20 /00005 Ü berschrif ten/ 1. 1 Ü bersc hrift en/ 1. 1 Übersc hrift en BD A/ 11 El ektrisc her Ansc hlus s @ 0 \mod_1226565067445_9. doc @ 3500 @
3.6 Electrical connection
Pos : 4. 21 /00004 Warnhinweis e/G ener al HIN WEI S Auf stell ung Z ugang G erätest ec kdos e @ 0\ mod_1233836960983_9.doc @ 5820 @
NOTICE
Installation of the machine
–
It must be possible to disconnet the machine from the mains at any time.
•
Install the machine such that the connection for the mains cable is
easily accessible.
Pos : 4. 22 /00003 St andard Kapit el/ General M odul Elektrischer Ans chl uss @ 0\ mod_1228918538521_9.doc @ 4731 @
The voltage required and the frequency of the machine are provided on the type
plate.
•
Ensure that the values agree with the available power supply system.
•
Connect the machine to the power supply system using the connecting cable
supplied.
CAUTION
An external fusing at the connection of the mains cable to the power supply must
be provided in accordance with the conditions of the place of installation.
Pos : 4. 23 /00010 Bedi enungsanleit ung en/00140 Kapit elsamml ung Paddle Bl ender/0001 Paddle Bl ender Kapitel Trans port und Aufs tel l ung/ 0102 PB Modul St ec kdos e Stromkabel @ 2\ mod_1262773446408_9.doc @ 18217 @
The Paddle Blender must be set up near a power outlet socket.
NOTE
Use only the provided power cable. No liability will be accepted for any damage
caused by the use of another cable.
110-120 V
220-240 V
Voltage
115 V +/-10%
230 V +/- 10%
Maximum voltage
1 A
0.5 A
Frequency
50-60 Hz
50-60 Hz
Power consumption
100 W
100 W
Fuse size
2AT
2AT
Check before connecting the device that the voltage selector switch at the back is
set tothe characteristics of the given source of voltage (triangle pointing to the line ,
see description on the back of the device).
NOTE
In the as-delivered state the pointer is at 230 V +-10 %.
Pos : 5. 1 / 00010 Bedienungsanlei tungen/------- Seit enumbruc h ----------- @ 0\ mod_1222344373758_0. doc @ 2386 @
