Retsch Mixer Mill MM 500 nano, Руководство пользователя

Страница: 62 / 95

Device control
62
Fig. 41: Program mode after starting the grinding process
Element Function
N1.2 Main menu Opens the Main menu
N1.3 Program mode Access to program mode
N3.2 Gallery view Opens the gallery view of the programs or the available
program memory locations
P1N Program number Number of the selected program
P1.1 Vibration frequency After selection with the touch display, the vibration
frequency can be set from 3 - 30 Hz with the dial (invalid
values are displayed in red)
P2.1 Grinding time After selection with the touch display, the grinding time can
be set from 10 seconds to 8 hours with the dial (invalid
values are displayed in red)
P2.2 Remaining grinding time Displays the remaining grinding time of the current grinding
process
B Scroll bar Indicator for the position of the menu
S2.1 Pause grinding process Stops the grinding process. Pressing it again continues the
grinding process.
S2.2 Editor mode
Opens the “Editor” program
S3.1 Start grinding process Starts the grinding process (This button is only visible after
setting valid parameters.)
S3.2 Stop grinding process Stops the grinding process
S3.2
S2.1
P2.2
P1.1
P2.1
S4
P1N
N1.3