Retsch Mixer Mill MM 500 nano Скачать руководство пользователя страница 23

Страница: 23 / 95

Packaging, Transport and Installation

4.3 Temperature Fluctuations and Condensation

NOTICE

N5.0016

Damaged components due to condensation

Temperature fluctuations

−

The device may be exposed to substantial fluctuations in temperature

during transport. The ensuing condensation can damage electronic
components.

•

Wait until the device has acclimatised before putting it into service.

Temporary storage:

Also in case of an interim storage the device must be stored dry and within the specified
ambient temperature range.

4.4 Conditions for the Installation Site

CAUTION

C5.0047

Risk of injury caused by the device falling

Incorrect installation of the device

−

Due to its weight, the device can cause injuries if it falls.

•

Only operate the device on a sufficiently large, strong and stable
workstation.

•

Ensure that all of the device feet are securely supported.

NOTICE

N6.0004

Setting up the device

Vibrations during operation

−

Depending on the operating mode of the device, slight vibrations may

occur.

•

Set up the device only on a vibration-free, plane and stable surface.

NOTICE

N7.0002

Setting up the device

Disconnecting the device from the mains

−

A separation of the device from the mains must be possible at any time.

•

Set up the device in such a way, that the connection for the power
cable is always easily accessible.

NOTICE

N8.0021

Ambient temperature

Temperatures outside the permitted range

−

Electronic and mechanical components may be damaged.

−

The performance data alters to an unknown extent.

•

Do not exceed or fall below the permitted temperature range (5 °C to
40 °C ambient temperature) of the device.

−

Maximum relative humidity < 80 % (at ambient temperatures

≤ 31 °C)

Содержание Mixer Mill MM 500 nano
































































































Результаты поиска

Содержание Mixer Mill MM 500 nano

Отзывы:

Похожие инструкции для Mixer Mill MM 500 nano

Бренды по названию

Популярные бренды

Retsch Mixer Mill MM 500 nano, Руководство пользователя

Результаты поиска

Содержание Mixer Mill MM 500 nano

Отзывы:

Похожие инструкции для Mixer Mill MM 500 nano

Бренды по названию

Популярные бренды