Retsch Mixer Mill MM 500 nano, Руководство пользователя

Страница: 59 / 95

Device control
59
Element Function
N1.1 System settings Call up system settings
N2.1 Program mode Access to program mode
N3.1 Cycle program mode Access to cycle program mode
N4 Acoustic signals on / off The sound is switched on when the element is visible.
P1.1 Vibration frequency After selection with the touch display, the vibration
frequency can be set from 3 - 30 Hz with the dial
P2.1 Grinding time After selection with the touch display, the grinding time can
be set from 10 seconds to 8 hours with the dial.
P2.2 Remaining grinding time Displays the remaining grinding time of the current grinding
process
P4.1 Grinding process
successfully completed
Grinding process is successfully completed.
B Scroll bar Indicator for the position of the menu
S1.1 Close device cover Before starting a grinding process, the device cover must
be opened once to insert the grinding jars. If the device
cover is then closed again, the indicated element
disappears.
S2.1 Pause grinding process Stops the grinding process. Pressing it again continues the
grinding process.
S3.1 Start grinding process Starts the grinding process
S3.2 Stop grinding process Stops the grinding process