Retsch Mixer Mill MM 500 nano Скачать руководство пользователя страница 27

Страница: 27 / 95

First Commissioning

5.1 Electrical Connection

WARNING

W4.0015

Risk to life caused by an electric shock

Connection to socket without a protective earth conductor

−

Connecting the device to sockets without a protective earth conductor can

lead to life-threatening injuries caused by an electric shock.

•

Always operate the device using sockets with a protective earth
conductor (PE).

WARNING

W5.0002

Danger to life through electric shock

Damaged power cable

−

Operating the device with a damaged power cable or plug can lead to life-

threatening injuries caused by an electric shock.

•

Before operating the device, check the power cable and plug for
damage.

•

Never operate the device with damaged power cable or plug!

NOTICE

N11.0022

Electrical connection

Failure to observe the values on the type plate

−

Electronic and mechanical components may be damaged.

•

Connect the device only to a mains supply matching the values on
the type plate.

WARNING

When connecting the power cable to the mains supply, use an external fuse that

complies with the regulations applicable to the place of installation.

−

Check the type plate for details on the necessary voltage

frequency, and maximum

external current source fuse for the device.

−

The listed values must agree with the existing mains supply.

−

Only use the supplied power cable to connect the device to the mains supply.

tand hat

The MM 500 nano must be connected to the power supply on site for initial commissioning.

Ensure the following before connecting the device to the power supply:

•

The application site complies with the installation requirements;

•

The device is securely and firmly in place;

•

The power values for the device (type plate) correspond to the values of the power
supply at the site.

Содержание Mixer Mill MM 500 nano
































































































Результаты поиска

Содержание Mixer Mill MM 500 nano

Отзывы:

Похожие инструкции для Mixer Mill MM 500 nano

Бренды по названию

Популярные бренды

Retsch Mixer Mill MM 500 nano, Руководство пользователя

Результаты поиска

Содержание Mixer Mill MM 500 nano

Отзывы:

Похожие инструкции для Mixer Mill MM 500 nano

Бренды по названию

Популярные бренды