Retsch Mixer Mill MM 500 nano Скачать руководство пользователя страница 79 | Manualshive

Страница: 79 / 95

background image

Device control

79

7.11.6 Software Version

The following two software versions of the device can be viewed in this section:

•

Firmware (device control)

•

Display (program control)



The current software versions are specified in turn, whereby the firmware is listed first.

7.11.7 Operating Hours

The operating hours of the device in hours and minutes (hh:mm) are displayed in this section.
The process times are counted, i.e. the total times between starting and stopping a grinding
process. The time cannot be manipulated.

7.11.8 Serial number

The serial number of the device can be displayed in this section.

7.11.9 Software Update

The software can be updated using this section.



There must be a suitable USB data carrier in the USB interface.

•

The USB data carrier must be formatted to the FAT32 file system.

•

USB 3.0 data carriers are not supported.

•

Only the software to be installed may be located in the main directory. The device
then automatically detects the new software.

Proceed as follows to update the software:



Press the

symbol to perform an update.



Wait until the transfer and installation have finished.



The dial flashes blue until the touchscreen is restarted. This may take a few seconds.

7.11.10

Service Environment

The service environment can be accessed using this section. The service environment can only
be accessed by service technicians who have been authorised by Retsch GmbH.



If the service environment is selected, the USB interface is activated and "On" displayed

beneath the

symbol. No other functions will be executed, however.



Deactivate the service environment by pressing on the section or exit the "System settings"

menu by pressing the

button.



All other functions remain deactivated while the service environment is activated.

7.11.11

Log file

Using this section a log file of the device can be prepared and saved on a USB carrier. This
function is also used to read out operating hours, error messages and information, and can only
be accessed by service technicians who have been authorised by Retsch GmbH.

«
...
77
78
79
80
81
...
»

Содержание Mixer Mill MM 500 nano
































































































Отзывы:

Нет отзывов

Похожие инструкции для Mixer Mill MM 500 nano

SACE Tmax XT Series

Бренд: ABB Страницы: 11

Бренд: Landoll Страницы: 83

Бренд: Panasonic Страницы: 180

Бренд: CAE Healthcare Страницы: 108

Бренд: Cannon Страницы: 36

Бренд: Nitecore Страницы: 4

Бренд: Garelick Страницы: 4

Бренд: IFM Страницы: 175

Бренд: IFM Страницы: 5

Бренд: Land Pride Страницы: 38

Бренд: Quick Страницы: 24

Бренд: JDS Uniphase Страницы: 144

IP Video Test Option HST-3000

Бренд: JDS Uniphase Страницы: 14

Бренд: Vaisala Страницы: 2

Бренд: Qtx Страницы: 6

Бренд: Lumineux Страницы: 2

Бренд: Kanlux Страницы: 4

Бренд: Raytec Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды