Retsch Mixer Mill MM 500 nano Скачать руководство пользователя страница 22

Страница: 22 / 95

Packaging, Transport and Installation

4.1 Packaging

The packaging has been adapted to the mode of transport. It complies with the generally
applicable packaging guidelines.

NOTICE

N2.0001

Complaint or return

Keeping the packaging

−

Inadequate packaging and insufficient securing of the device can

jeopardise the warranty claim in the event of a complaint or return.

•

Keep the packaging for the duration of the warranty period.

4.2 Transport

WARNING

W2.0005

Risk of injury due to the device falling down

Lifting the device above head height

−

The device can fall causing serious injuries when lifted above head
height.

•

Never lift the device above head height!

CAUTION

C4.0000

Risk of injury caused by the device falling down

Incorrect transport of the device

−

Due to its weight, the device can cause injuries if it falls down.

•

Do not transport the device by yourself.

NOTICE

N3.0017

Damage to components

Transport

−

Mechanical or electronic components may be damaged during transport.

The device must not be knocked, shaken or thrown during transport.

•

Move the device gently during transport

NOTICE

N4.0014

Complaints

Incomplete delivery or transport damage

−

The forwarding agent and Retsch GmbH must be notified immediately in

the event of transport damage. It is otherwise possible that subsequent
complaints will not be recognised.

•

Please check the delivery on receipt of the device for its
completeness and intactness.

•

Notify your forwarding agent and Retsch GmbH within 24 hours.

Содержание Mixer Mill MM 500 nano
































































































Результаты поиска

Содержание Mixer Mill MM 500 nano

Отзывы:

Похожие инструкции для Mixer Mill MM 500 nano

Бренды по названию

Популярные бренды

Retsch Mixer Mill MM 500 nano, Руководство пользователя

Результаты поиска

Содержание Mixer Mill MM 500 nano

Отзывы:

Похожие инструкции для Mixer Mill MM 500 nano

Бренды по названию

Популярные бренды