Retsch Mixer Mill MM 500 nano, Руководство пользователя

Страница: 78 / 95

Device control
78
Fig. 56: Remote
The display shows the information
•
vibration frequency,
•
grinding time

For more information on connecting the device to the WLAN module and controlling the
device via remote, please refer to the separate Retschbox operating instructions.
7.11.3 Signalling device
The signalling device on the device can be switched on or off using this section.
The signalling device generates an acoustic signal as soon as a grinding process finishes.
7.11.4 Brightness
Proceed as follows to adjust the brightness level on the touchscreen:

Press the section.

Turn the dial until the desired level of brightness has been reached on the display.

The set value will be accepted as soon as you press this section again or on another
section, or as soon as you exit system settings.
7.11.5 Date and time
Proceed as follows to adjust the date and time:

Press the section.

Select the desired settings using the dial.

The set values will be accepted as soon as you press this section again or on another
section, or as soon as you exit system settings.