RZ/G1M
5. Pin Function Controller (PFC)
R01UH0626EJ0100 Rev.1.00
5-5
Sep 30,2016
5.3 Register
Description
[Legend]
Initial value: Register value after a reset
:
Undefined value
R/W:
Readable/writable. The written value can be read.
R:
Read-only. The write value should always be 0.
R/WC0:
Readable/writable. Writing 0 initializes the bit. Writing 1 is ignored.
R/WC1:
Readable/writable. Writing 1 initializes the bit. Writing 0 is ignored.
W:
Write-only. Reading this bit is prohibited. When the bit is reserved, the write value should always be 0.
—/W:
Write-only. The read value is undefined.
All the bits are active high unless otherwise specified, and deactivated on reset.
All access to registers is made in longword units.
The write value to a reserved bit should always be 0.