Reliance electric DC2 VS series страница 6 Скачать руководство пользователя

Страница: 6 / 56

1: Receive

and

Accept the Controller

Receive and Accept the Shipment

The Reliance

DC2 V

Controller (herein referred to as controller)

has been designed, manufactured and thoroughly tested to provide

many years of reliable service. The shipping container in which you

received your controller has been specifically designed to protect it

during transportation and handling.
Reliance terms of sales, in all instances, are F.O.B. point of origin. It is

your responsibility to thoroughly inspect the equipment before

accepting shipment from the transportation company.
If any of the items called for on the bill of lading or express receipt are

damaged or are not included,

do not

accept the shipment until the

freight or express agent makes an appropriate notation on your freight

bill or express receipt.
If any concealed loss or damage is discovered later, notify your freight

or express agent within 15 days of receipt and request that he make an

inspection of the shipment. Keep the entire shipment intact in its

original shipping container.
The consignee is responsible for making claim against the Carrier for

any shortage or damage occurring in transit. Claims for loss or damage

in shipment must not be deducted from the Reliance Electric invoice,

nor should payment of the Reliance invoice be withheld while awaiting

adjustment of such claims since the carrier guarantees safe delivery.
If considerable damage has been incurred and the situation is urgent,

contact the nearest Reliance Electric Sales Office for assistance. To find

the nearest sales office, call tollfree 18002454501.

Store the Controller until Installation

After receipt inspection, repack the controller in its shipping container

until installation. If a period of storage is expected, store in the original

shipping container with its internal packing.
To ensure satisfactory drive operation at startup and to maintain

warranty coverage, store the equipment:

In its original shipping container in a clean, dry, safe place.

In an ambient temperature that does not exceed 65

C (149

F) or go

below -30

C (-22

F).

Within a relative humidity range of 5 to 95% without condensation.

Away from a highly corrosive atmosphere. In harsh environments,

cover the shipping/storage container.

Содержание DC2 VS series

























































Результаты поиска

Содержание DC2 VS series

Отзывы:

Похожие инструкции для DC2 VS series

Бренды по названию

Популярные бренды

Reliance electric DC2 VS series, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание DC2 VS series

Отзывы:

Похожие инструкции для DC2 VS series

Бренды по названию

Популярные бренды