Reinke Ontrac, Инструкция по установке и обслуживанию

Страница: 18 / 207

**Reinke Manufacturing strongly recommends mounting the Tower Mounted Ontrac on the Next to Last or “B”
Box Tower, but it can be mounted on any Tower except the First or Last Tower. The First Tower may not move often
enough and the Last Tower contains overhead obstructions which can interfere with the operation of the Ontrac
System.**
Ontrac Kit - Tower Mount with Stop - Iridium (350784)
Ontrac Tower Box Assembly Mount (P/N ) 141531-G
Span Pipe adjacent to Receiver
Wrap Lock Band (P/N 116719)
Control Box Clip (P/N 141535)
(Underneath Clamp)
Step 3: Install the Ontrac Tower Box
Assembly Mount on the (P/N ) 141531-G
Water Pipe next to the Receiver of the
chosen Tower as shown using the
hardware provided.
See illustrations to
the right and below.
When assembling the mount, place the Control Box Clip in the slots of the
(P/N 141535)
Ontrac Tower Box
Assembly Mount . Make sure the Wrap Lock Band is directly over the Control
(P/N 141531-G) (P/N 116719)
Box Clip before it is completely tightened. Make certain that the Ontrac tower box is securely
(P/N 141535)
fastened to the water pipe.
Ontrac Installation Manual
“B” Box
Ontrac Box
Recommended
Location
Step 4:
Install the Ontrac Antenna Mount Bracket and Ontrac Tower Mount with Stop Assembly
(P/N 147051)
(P/N 350784) See illustration
using the hardware provided.
Ontrac Tower Mount Solar
Satellite Assembly (P/N 350784)
Ontrac Antenna
Mount Bracket
(P/N 147051)
3/8” NC Serrated Locknut ZC
(P/N 1043)
3/8” NC X 2” HHD-
GR5-ZC Bolt
(P/N 2013)
91