Reinke Ontrac, Инструкция по установке и обслуживанию

Страница: 3 / 207

The Reinke Electrogator II System is designed with many electrical and mechanical safety features.
However, each operator must read and understand this and all other accompanying owners manuals
. If this System is operated
incorrectly, it can pose a safety threat to the operator and others. The following is a list of safety operating
tips which all service and operating personnel must read and understand.
Reinke Electrogator II System
for
the safe and efficient operation of your
The Safety Alert Symbol is
displayed many places
throughout this manual
and on your System to
indicate when there is a
potential for Personal
injury.
Throughout this manual and on System Decals,
the words “DANGER”, “WARNING”, and
“CAUTION” are used with the Safety Alert
Symbol to alert the operator of potential
hazards. DANGER” identifies the most serious
hazards. “DANGER” or “WARNING” safety
signs identify specific hazards. “CAUTION”
signs identify specific safety instructions.
The movement of an Electrically Powered,
Gear-Driven, Irrigation System is relatively
slow.
Moving parts are exposed and may
present a potential hazard. Therefore, keep all
equipment, vehicles, people, etc., out of the
System’s path.
DO NOT attempt to perform any maintenance
procedures until the Main Control Panel
Disconnect Switch and all Pump and other
Disconnect Switches are locked in the “OFF”
position.
Electrical component trouble-
shooting and replacement should be performed
by a certified Service Technician to ensure built-
in safety features remain intact.
This also
ensures System remains compliant with the
National Electric Code and the Manufacturers
Specifications. Replace all Protective Guards
and Shields before restoring power to the
System.
Do not allow anyone to ride or climb on the
System unless they are qualified and required to
do so for maintenance purposes.
The Tower Steps have been provided for access to
the Tower Control Boxes only.
They are not
intended for access to the Span. For instance,
should the Sprinkler Heads require service, use a
ladder to reach them from the ground.
Exercise caution when handling fuel near
Systems equipped with Combustion Engine-
driven Generators and Pumps.
If you attempt to repair your System and are
uncertain of your methods, contact an authorized
Service Person.
K e e p a w a y f ro m t h e S y s t e m d u r i n g
thunderstorms or other severe weather
conditions. The Center Pivot is grounded and the
System is probably the highest object in the field,
making it a good lightning receptor.
Be sure Protective Guards are installed on all
Belts and Driveshafts of Ancillary Equipment
such as Combustion Engines, Electric Motors,
Pumps, etc.
If you suspect a short circuit or the System is not
working correctly, do not touch the System and
keep others away from it.
Call your Service
Technician. Electrical component trouble-
shooting and replacement should be performed
by a certified Service Technician to ensure built-
in safety features remain intact.
This also
ensures System remains compliant with the
National Electric Code and the Manufacturers
Specifications.
Preface
Ontrac - System Safety