Reinke Ontrac, Инструкция по установке и обслуживанию

Страница: 39 / 207

Ontrac Tower Mount With Stop & GPS-Iridium (350784GPS)
Ontrac Installation Manual
112
“B” Box
mounted
here
1
2
3
4
5
7
6
Step 11. Mount Ontrac GPS Box to the water pipe flange as shown below on the
“B” Tower. Reuse the existing flange bolts for optional mounting of the box see facing
page. Make sure to securely fasten the Box to the mounting bracket.
1. - (P/N 1043 Nut 3/8 Nc Serrated Lcknt Zc) Nut
2. - (P/N 2013 bolt 3/8nc X 2 Hhd-Gr5-Zc) Bolt
3. - (P/N 140724GPS Ontrac with Box Assembly
GPS) & (P/N 117007 GPS Receiver WAAS Enabled)
Solar Panel Not Shown
4.
- (P/N 117025 Ant-GPS Tube 3/4/X60
GPS Mast
Sch 40 GA)
5.
- (P/N 144509-G Bracket-Boom
Bracket
Rod/Light Brkt/-G)
6.
- (P/N 8200 Nipple-Chase 3/4 In Galv ZP
Bushing
7. - (P/N 8021 Cplng-Stl Pipe 3/4 Galv)
Coupling
Connect the GPS
Receiver Cable to
the 5 Position
Adapter according
to the chart below.
Cut the unused
wires short.
Colors will vary
with Receiver
type.
Step 12. With the Receiver Cable installed through the Strain Relief and box Re-Connecting Receiver Cable.
base, re-attach the 5 Position Adapter. The wire order depends on which GPS Receiver is used, see the
wire table below. Follow the color code shown below for your receiver type. Insert the wire in the proper
terminal and tighten the screw to secure the wire. Repeat for each wire.
5 Position Adapter
Connections shown are
for Model 17 Receiver
GPS EOS Board
GPS Receiver Cable
GPS
Receiver
Type