MANUAL TEST FUNCTIONS
59
Notes:
-
To connect the TALAN to Gigabit systems that will not auto-negotiate down to 100
Mbps, a third party switch could be used to provide a mirrored port at 100 Mbps while
not affecting the gigabit traffic.
-
Disconnecting a VoIP phone to connect the VoIP Test Adapter will disrupt any active
network traffic on that line. Leaving a VoIP Test Adapter in place on a specific phone
line provides the capability to test the phone at any time without having to disrupt the
line. Additional VoIP Test Adapters can be purchased from REI.
-
The VoIP Test Adapter (black box) is used to analyze VoIP traffic from a VoIP phone
using the TALAN’s Ethernet port. The VoIP Adapter Cable is used when performing
TALAN’s other test functions (DMM, Audio, FDR, RF Analysis, etc…) by inserting it
between the VoIP phone and the PHONE jack on the back of the TALAN.
Most VoIP phones and VoIP capable PCs are connected to a network using a General Switch, or
a Managed switch, as shown below:
Содержание TALAN 3.0
Страница 2: ......
Страница 33: ...MANUAL TEST FUNCTIONS 33 Select the name of the data set you want to recall and select OK...
