MANUAL TEST FUNCTIONS
34
Save Data to a Target Example
Saving data so that it is associated with a target means that the data will get placed into the
Sequence Data
for a target within a given Job database. This data can be accessed in the
Sequence Data
section of TALAN Data Viewer.
The
Sequence Data
section presents the data in a tree representation starting with the main
top level location, through the various sub-locations, ending up at a given target.
To save data so that it will be associated with a Target, that specific target and its respective Job
Database must be open.
To save the DC Voltage measurements taken in the Manual DMM test, select
F3
(Manual) then
select
Save Data to a Target
.
Select the stage for this test, e.g.
On-Hook
,
Off-Hook
,
Disconnected
, etc. for the appropriate
test type and physical setup. Note: This list of stages varies depending upon the test type
(DMM, Audio, etc.) and the stage selected.
Содержание TALAN 3.0
Страница 2: ......
Страница 33: ...MANUAL TEST FUNCTIONS 33 Select the name of the data set you want to recall and select OK...