REI TALAN 3.0, Руководство пользователя

Страница: 80 / 82

HARMONIC LOCATOR PROBE: LINE TRACING AND TAP DETECTION
80
Misc. Displays
Startup
When the user first puts in a battery or turns the unit on, there will be a brief period
(approximately 2 seconds) where the unit goes through the calibration routine. This is used
to sample the current ambient noise floor and is used to establish the proper operation of
the RSSI display. During this process the user will notice the bottom green and red LED
oscillating back and forth.
Low Battery Condition
If the 9V battery ever gets below 5.8V, the Low Battery Indicator (LBI)
in the top center will glow red. See Figure 11.
Figure 11: Low Battery Condition
HLP Battery Compartment
The power source is a 9V battery. There is a
sliding door that is used to retain the battery.
See Figure 12.
Figure 12: Battery Compartment