PowerLift
by ReechCraft
54
This section contains troubleshooting information to be used for locating and
correcting most of the operating problems which may develop in the machine.
If a problem should develop which is not presented in this section, qualified
guidance should be obtained before proceeding with any maintenance.
Troubleshooting Information
The troubleshooting procedures applicable to the product are listed and
defined in Table 7-1, Troubleshooting Guide.
Each malfunction within an individual group or system is followed by a listing
of probable causes which will enable the determination of the applicable
corrective action. The probable causes and corrective action should, where
possible, be checked in the order listed in the tables.
It should be noted that there is no substitute for thorough knowledge of the
equipment and related systems.
It should be recognized that the majority of the problems arising in the
machine will be centered in the power system. For this reason, every effort has
been made to ensure that all likely problems in these areas are give the fullest
possible treatment. In the remaining machine groups, only those problems
which are symptomatic of greater problems which have more than one
probable cause and remedy are included. This means that problems for which
the probable cause and remedy may be immediately obvious are not listed in
this section.
Section 7
TROuBlEShOOTING
7.1
General
