www.reechcraft.com/powerlift
888-600-6160
51
secti
On
6
SERVICE & MAINTENANCE
6.5
Decal Replacement
All decals must be mounted to the machine as specified and clearly legible.
Please see Figure 5-1 to Figure 5-4 and refer to table 5-1 for positions and
ReechCraft part numbers.
To replace a damaged decal, first remove it completely without damaging the
underlying surface. Remove any remaining adhesive with a suitable solvent. Test
the solvent on an inconspicuous area first to ensure it does not mark or damage
the surface finish.
SURFACE DAMAGE COULD RESULT IN CORROSION AND STRUCTURAL
DAMAGE.
Before applying the new decal, ensure the surface is clean and dry.
Remove the backing paper, apply the decal along one edge then seal it gently
and evenly.
If there are any air bubbles, work them gently towards the edge with a clean cloth.
Pressure sensitive adhesives reach full strength after several days.
MAST SECTIONS SHOULD BE INSPECTED EVERY 3 MONTHS OR MORE
FREQUENTLY DEPENDING ON ENVIRONMENT
The Mast Track sections should be inspected more frequently if used in a
harsh environment or high duty cycle applications. Inspection should be more
frequent as they approach the end of their useful lives. The periodic inspection
shall cover all mast track sections on the machine.
Mast Track sections must be replaced by an Authorized ReechCraft Service
Center.
DANGER
NOTICE
CAUTION
WARNING
DANGER
NOTICE
CAUTION
WARNING
6.6
Mast Track Inspection procedure