PowerLift
by ReechCraft
10
1.3
Operation
General
•
Do not use the machine for any purpose other than positioning
personnel, their tools, equipment and materials.
•
Never operate a machine that is not working properly. If a malfunction
occurs, shut down the machine and contact ReechCraft.
•
Unless in an emergency, do not allow personnel to tamper with, or
operate the machine from the ground with personnel on the platform.
•
The operator will not elevate the platform unless the bearing surface is
stationary and capable of supporting the intended load.
•
Always ensure that power tools are properly stowed and never left
suspended by their cord from the platform.
•
Be sure to fully lower the platform completely and shut off all power
before leaving the machine.
•
No more than one person is allowed on the machine. Only the operator
is permitted in the platform during operation.
Fall Hazards
•
Do not enter or leave the platform while
elevated.
•
Before operating the machine, make
sure all mast sections, outriggers,
railings and gates are in their proper
position. Be sure the platform is
properly secured to the climbing unit
before operating the machine.
•
Keep both feet firmly positioned on the
platform floor at all times. Never use
ladders, boxes, steps, planks or any
other item on the platform to provide
additional height for greater reach.
•
Never use the mast or railings to enter
or leave the platform.
secti
On
1
SAFETY pRECAuTIONS
