PowerLift
by ReechCraft
16
2.1
personnel Requirements
This Machine is intended to be used as a personnel handling device and must
be operated and maintained by competent personnel only.
Anyone under the influence of drugs or alcohol, or subjected to bouts of
dizziness, seizures or loss of physical control must not operate this machine.
Operator Requirements
Before operating this machine, the operator must read and comprehend
this manual.
The operator must be familiar with:
1. Use and limitations of the components of the machine, including the
specification requirements of the drill motor.
2. Instruction placards and warning decals on the machine and in this
manual.
3. Employer and government regulations.
4. Use of approved fall protection device (where applicable).
5. Sufficient mechanical aptitude and knowledge of the machine to
recognize a component malfunction or a potential malfunction.
6. The safest means to operate the machine where overhead and ground
hazards are present. These hazards include: overhead obstructions,
additional moving equipment, obstacles, depressions, drop-offs, etc.
7. A means to avoid unprotected electrical conductors.
8. The specific job requirements.
Section 2
pREpARATION & INSpECTION
Operator Responsibilities
The exercise of good judgment, safety control and caution in evaluating each
situation is the responsibility of the Operator. The Operator must shut down the
machine in the event of a malfunction or other unsafe condition of the machine
or job site.
