www.reechcraft.com/powerlift
888-600-6160
31
DO NOT USE MACHINE IF CHASSIS CANNOT BE LEVELED
Elevating
Make sure the pre-start inspection has been completed and the machine is safe to
use and the chassis is level and stable with all four outriggers bearing weight.
Move the direction selector so the drill motor is in the forward (clockwise)
position.
Hold the drill motor
handle firmly, push
down lightly to
automatically disengage
the drive shaft brake,
then squeeze the trigger
to elevate.
Stop using the drill
motor if any part of it
becomes excessively
hot. Wait until the drill
motor has cooled down
before continuing
operation.
DANGER
NOTICE
CAUTION
WARNING
Figure 3-5 Drill Motor Operation / Elevating
Figure 3-4 Bubble Level
secti
On
3
MAChINE OpERATION
