PowerLift
by ReechCraft
34
General
The machine may be manually maneuvered or transported in a vehicle
disassembled or fully stowed.
DO NOT ATTEMPT TO TRANSPORT OR MOVE MACHINE UNLESS THE
PLATFORM IS FULLY LOWERED. DO NOT MOVE THE MACHINE WITH
PERSONNEL IN THE PLATFORM.
The machine may be moved around a worksite using the following methods:
•
Fully assembled, pushed around the floor using the casters.
•
Disassembled, with each major component carried separately.
There are two ways to move the assembled machine:
Upright Maneuvering
•
The machine can be pushed or pulled around using the swivel casters.
•
The floor is required to be smooth, level and dry.
•
All outriggers must be installed corresponding to the number of masts,
and elevated temporarily during maneuvering only. (See Figure 3-4)
•
There can be no significant weight on the machine while it is being rolled
around.
•
Be sure there are no overhead or ground obstructions or hazards
NOTE:
Be sure the swivel casters are in their unlocked position and free of
debris on the wheel or in the mechanism.
Tilted Over Maneuvering
•
For increased control, lock the rear casters before tilting back.
•
Ensure that control of the machine will be maintained during tilt back
and during transport.
•
Be sure to maintain a firm grasp of the handle at all times during
transport.
•
Familiarize yourself with the terrain and identify and avoid any
overhead or ground hazards before tilting back and transporting.
3.5
Maneuvering & Transport
DANGER
NOTICE
CAUTION
WARNING
secti
On
3
MAChINE OpERATION
